LCD and Policy Article Revisions Summary for December 19, 2024 - JA DME

Joint DME MAC Publication
Posted December 19, 2024

Outlined below are the principal changes to the DME MAC Local Coverage Determination (LCD) and Policy Article (PA) that have been revised and posted. The policy included is Intravenous Immune Globulin. Please review the entire LCD and related PA for complete information.

Intravenous Immune Globulin

LCD

Revision Effective Date: 01/01/2025
HCPCS CODES:
Added: HCPCS code J1552 to Group 1 Codes

12/19/2024: Pursuant to the 21st Century Cures Act, these revisions do not require notice and comment because the revisions are non-discretionary updates due to CMS HCPCS coding determinations.

PA

Revision Effective Date: 01/01/2025
CODING GUIDELINES:
Revised: Direction for billing ALYGLO using HCPCS code J1599 for dates of service on or after December 15, 2023
Added: Direction for billing ALYGLO using HCPCS code J1552, effective for dates of service on or after January 01, 2025

12/19/2024: At this time the 21st Century Cures Act applies to new and revised LCDs which require comment and notice. This revision is to an article that is not a local coverage determination.

Note: The information contained in this article is only a summary of revisions to the LCDs and/or PAs. For complete information on any topic, you must review the LCDs and/or PAs.

With the update(s) listed above, Noridian would like to remind users how to find the policy that was previously effective. When billing, the supplier should follow guidance that was effective on the date of service. The below steps can be followed to find all previous policies:

1. Open the currently effective policy on the Medical Coverage Database (MCD)
   1. Links to the MCD can be found on the Active LCDs page on the Noridian website
      1. There is a link at the top of the Active LCD page that goes to a full list of the LCDs or PAs, depending on which link is selected OR
      2. There are direct links to all LCDs under the 'LCD ID number and Effective Date' column
2. Scroll down to the bottom of the policy
3. Find the section labeled Public Version(s)
4. Look for the link to the policy that was effective on the dates of service in question.
5. Click on hyperlink to go to the policy.